Severity Medium
P202E

Reductant Injection Valve Circuit Range/Performance Bank 1 Unit 1

📅 Last reviewed: July 2026
What does the P202E code mean?

The P202E code indicates that the powertrain control module (PCM) has detected a range or performance issue in the reductant injection valve circuit for Bank 1, Unit 1. This valve is part of the selective catalytic reduction (SCR) system, which injects diesel exhaust fluid (DEF) into the exhaust stream to reduce NOx emissions. The PCM monitors the valve's electrical circuit and operation; when the signal is out of expected range or the valve fails to perform correctly, this code is set. Common causes include a faulty reductant injection valve, wiring issues, or a defective PCM.

Medium
Severity
$200-$600
Typical Cost
Medium
Frequency

1. Most Common Causes

2. Symptoms You Will Notice

3. Step-by-Step Diagnosis

1

Step 1: Use a scan tool to retrieve all codes and freeze frame data.

2

Step 2: Visually inspect the reductant injection valve and its wiring for damage or corrosion.

3

Step 3: Test the valve's resistance and compare to manufacturer specifications.

4

Step 4: Check for power and ground at the valve connector using a multimeter.

5

Step 5: If wiring and valve are okay, test the PCM output signal or replace the valve.

4. Frequently Asked Questions

Is it safe to drive with this code?

It is not recommended to drive long distances as the vehicle may enter limp mode and emissions will be high. Short trips may be possible but should be avoided.

How much does it cost to fix?

The cost typically ranges from $200 to $600, including parts and labor. The reductant injection valve itself costs $100-$300, plus diagnostic time.

5. Commonly Affected Makes

This is a generic OBD2 code, potentially applicable to any manufacturer using this diagnostic standard.

6. Related Codes

Need an OBD2 Scanner for the P202E? Compare the best scanners compatible with all vehicles
🛒 View OBD2 Scanners →