Severity High
P0B0A

Auxiliary Transmission Fluid Pump Motor Supply Voltage Low

📅 Last reviewed: July 2026
What does the P0B0A code mean?

The P0B0A code indicates that the powertrain control module (PCM) has detected a low voltage condition in the supply circuit for the auxiliary transmission fluid pump motor. This pump is used in hybrid and electric vehicles to circulate transmission fluid when the main engine is off, ensuring proper lubrication and cooling. A low voltage reading suggests a problem with the electrical circuit, such as a blown fuse, damaged wiring, or a failing pump motor.

High
Severity
$150-$400
Typical Cost
Medium
Frequency

1. Symptoms You Will Notice

2. Most Common Causes

3. Step-by-Step Diagnosis

1

Step 1: Use a scan tool to confirm the code and check for related codes.

2

Step 2: Inspect the auxiliary pump fuse and relay; replace if blown.

3

Step 3: Visually inspect wiring and connectors for damage or corrosion; repair as needed.

4

Step 4: Test the pump motor supply voltage at the connector using a multimeter (should be near battery voltage).

5

Step 5: If voltage is present, test the pump motor resistance and operation; replace if faulty.

4. Frequently Asked Questions

Is it safe to drive with this code?

It is not recommended. Driving with a low voltage condition can cause the auxiliary pump to fail, leading to transmission overheating and potential damage, especially in hybrid vehicles that rely on the pump when the engine is off.

How much does it cost to fix?

The cost varies depending on the cause. Replacing a fuse or relay is cheap ($10-$30), but if the pump motor needs replacement, parts and labor can range from $150 to $400.

5. Commonly Affected Makes

This is a generic OBD2 code, potentially applicable to any manufacturer using this diagnostic standard.

6. Related Codes

Need an OBD2 Scanner for the P0B0A? Compare the best scanners compatible with all vehicles
🛒 View OBD2 Scanners →