P0895: Shift Time Too Short
The P0895 code indicates that the transmission control module (TCM) has detected that the time required for a gear shift is shorter than the expected calibrated range. This can be caused by a stuck shift solenoid, low transmission fluid, or internal transmission wear. The TCM monitors shift timing and sets this code when a shift completes too quickly, often due to excessive hydraulic pressure or a mechanical issue.
01. Most Common Causes
- Faulty shift solenoid
- Low or dirty transmission fluid
- Internal transmission wear or damage
- Faulty TCM or wiring issues
02. Symptoms You Will Notice
- Harsh or abrupt shifting
- Check Engine Light on
- Transmission slipping or erratic behavior
- Reduced fuel economy
03. Step-by-Step Diagnosis
Step 1: Scan for additional codes and check freeze frame data.
Step 2: Inspect transmission fluid level and condition; top off or replace if necessary.
Step 3: Test shift solenoid resistance and operation using a multimeter or scan tool.
Step 4: Check wiring and connectors to the TCM and solenoids for damage or corrosion.
Step 5: Perform a transmission pressure test to verify hydraulic pressure.
04. Commonly Affected Makes
05. Frequently Asked Questions
Is it safe to drive with this code?▼
It is not recommended to drive long distances as harsh shifting can cause further transmission damage. Have it diagnosed promptly.
How much does it cost to fix?▼
Repair costs vary; a solenoid replacement may cost $150-$400, while internal transmission repairs can exceed $1,500.