Severity Medium
P0625

Generator Field/F Terminal Circuit Low Voltage

📅 Last reviewed: July 2026
What does the P0625 code mean?

The P0625 code indicates that the powertrain control module (PCM) has detected a low voltage condition in the generator field or F terminal circuit. This circuit controls the alternator's field current, which is necessary for charging the battery. A low voltage reading suggests a problem with the alternator, wiring, or PCM, potentially leading to battery drain and charging system failure.

Medium
Severity
$50-$150
Typical Cost
High
Frequency

1. Most Common Causes

2. Symptoms You Will Notice

3. Step-by-Step Diagnosis

1

Step 1: Use a multimeter to check battery voltage (should be 12.6V key off, 13.5-14.5V engine running).

2

Step 2: Inspect the alternator field circuit wiring and connectors for damage, corrosion, or loose connections.

3

Step 3: Test the alternator output and field circuit with a scan tool or multimeter; check for voltage at the F terminal.

4

Step 4: If wiring is intact, test the alternator's internal regulator and field winding; replace alternator if faulty.

5

Step 5: Check fuses and fusible links related to the charging system; replace if blown.

4. Frequently Asked Questions

Is it safe to drive with this code?

No, it is not safe. The vehicle may stall or leave you stranded due to a dead battery. Have it diagnosed and repaired promptly.

How much does it cost to fix?

Typically $50-$150 for diagnosis and minor repairs like wiring or fuses; alternator replacement can cost $200-$500.

5. Commonly Affected Makes

This is a generic OBD2 code, potentially applicable to any manufacturer using this diagnostic standard.

6. Related Codes

Need an OBD2 Scanner for the P0625? Compare the best scanners compatible with all vehicles
🛒 View OBD2 Scanners →